-
June 12th, 2006, 11:24 PM
#1
Inactive Member
HI Ineed to know the watt & amp rating
of a pair of altec lansing speaker model
#1207b serial # 6407 & 6215 they sound great but i want to match them to the right amp
thanks fixer
-
June 13th, 2006, 12:45 AM
#2
Senior Hostboard Member
Hi
These are column speakers with 403A. Impedance is 12 ohms. You will need a transformer to match these to anny amp.
Queation: How manny speakers per column?
............................................
-
June 13th, 2006, 01:00 AM
#3
Senior Hostboard Member
If I deduct the impedance you would have 3, 4 ohms in series in each column. 12 ohms . Wattage 12 watts each. = 32 watts total.
You could drive them with an 8 ohm amp. Best would be a 12 ohm amp. Line level matching transformer required for best results.
Crown CD Amp.
................................................
-
June 13th, 2006, 12:25 PM
#4
Senior Hostboard Member
Why is a transformer needed? Any modern amp will drive a 12 ohm load with no problem.
Just curious what your train of thought is.
-
June 13th, 2006, 08:20 PM
#5
Senior Hostboard Member
Ah, now I see. Yes a great amp. It might be cheaper though just to buy a little bit bigger amp. The transformers aren't cheap.
-
June 14th, 2006, 01:13 AM
#6
Inactive Member
HI folks thanks for the info ! I couldn't find
these speakers listed here anywhere. I got coureus and opened 1 up , it has 6 8ohm
403a speakers (clean & neat inside)outside
they look good too, also have a ( altec 1212a
portable control console ) it was not as well
kept, storage was not kind to it can't find it here either, but it came with a manual, pops the built in breaker every time i turn it on
thanks
fixer
-
June 14th, 2006, 03:16 AM
#7
Senior Hostboard Member
Hi,
I based my thought on the Crown D75A which is a great little amp according to studio engineers.
16 ohms = 20 watts
8 ohms = 40 watts
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
-
June 14th, 2006, 02:05 PM
#8
Inactive Member
I have a pair of 1207s that I bought in 1974. They have 6 drivers in each cabinet and will work fine with ANY normal audio amplifier - no transformer required or desired. They are certainly NOT "great," being useful only over the voice frequencies. They cannot in any reasonable way be considered full range systems. An equalizer helps, but I suggest selling them and getting something else.
-
June 15th, 2006, 03:44 AM
#9
Senior Hostboard Member
Hi Fixer,
Sorry for misinformation about 1207. I looked through the catalogue on June 12th and it's there.
For some reason my computer kept giving me a different page.
Here is the site.
http://www.lansingheritage.org/image...-mi/page07.jpg
.......................................
-
June 16th, 2006, 03:08 PM
#10
Senior Hostboard Member
well..here i go my first log in or post or what have you... first let me say im a fan, the regs here are fantasic at giving freely the information. i started out at a young age listening to groups like the kingston trio on my dads set of altecs and then one day i traded some labor for a pair of 1217b's..and it began all over again. these were thrashed and i had them reconed with new diaphragms installed in the idt-5o h-600 horns. needless to say..i melted them. however ive found a complete set of new or as new 403a, thats 12 of them. along the way i picked up a set of altec 840 cabs..also having 6 403a's in each.. now a total of 24 full range 8's going is a full sound. having never heard the 755 i wouldnt go the expense of 24..lol from my experience the 403a is a nice sounding little speaker, tho ive melted my share
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
This forum has been viewed: 28131802 times.
Bookmarks